CamelWay Machinery


Send Your Mail At:

[email protected]


+86 15837165804

mixed proportions of raw material for fly ash bricks-temin

2. Mix Proportion For Fly Ash Bricks. manufacturing – (Here Hydrated Lime is used instead of Sludge Lime) Fly ash – 57 to 65%. River Sand or Stone dust – 18 to 27%. Hydrated Lime – 9 to 12 %. Gypsum – 5%. This is the widely practiced mix proportion to make quality fly ash bricks.

What is the best raw material ratio for fly ash bricks

What is the best raw material ratio for fly ash bricks

Commonly, the raw materials of the fly ash bricks are cement, sand, crushed stone, fly ash, construction refuse, ceramisite and so on. As for the raw material ratio for fly ash bricks, I think the recipe in the following picture is very good.

experimentally investigated the fly ash brick mix proportions Use of fly ash as a raw material for the production the optimal mix percentage of fly ash

We also suggest make sample batches of Fly Ash Bricks Mixing Formulas ( Fly Ash fly Ash Bricks. you can adjust Raw materials mixing ratio as per your

FLY ASH AND FGD GYPSUM AS RAW MATERIALS FOR THE MANUFACTURE OF with untreated raw materials (i.e. the fly ash, mix proportion was: 40 mass.% fly ash,

Success Formula for Flyash Brick | Mixing Ratio. Fly ash, Hydrated lime The proportion of the raw material is generally in the ratio .

Preparation of the raw material. Fly ash(sand), gypsum: The slurry is the admixture of fly ash (sand) and gypsum. Mixed fly ash (sand) and gypsum in certain proportion in the slurry mixer tank, and then add water into slurry; finally, we can get the appropriate concentration slurry, and then it will be pumped by slurry pump into slurry tanks

Get an Instant Quotation!

Please feel free to fill the form bellow, our sales manager will reply in 24 hours.Marked by * is required.